Product quality and process reliability thanks to state-of-the-art measuring and testing technology
Process reliability and product quality thanks to state-of-the-art measuring and testing technology
Measuring and testing ensures quality and is a prerequisite for the exact adjustment of products. From product development to series production to failure tests - with our solutions we enable precise product and quality assessment as well as the adjustment of your products to the desired target values. Intelligent data processing ensures closed control loops and thus efficient and optimized production processes. In this way, you sustainably ensure the quality of your products and the satisfaction of your customers.
Efficiency
thanks to intelligent data analysis and quality-controlled optimization of manufacturing and production processes
Flexible and fast
development and implementation of test systems by simultaneous engineering and modernst laboratories
Local and fast support
by worldwide on-site located expert teams
Our fully integrated offering
From consulting and training to feasibility studies and pre-testing of individual tests to series testing – we develop and build turnkey test systems with proven test processes and test sequences according to the respective product life cycle phase:
- for use in the development phase, highly flexible with manual handling
- for use in series production, automated and highly productive with optimized cycle time
- for failure tests, endurance stable with long-term data recording and suitable safety technology
Our technologies
Pneumatic / gas- and leakage testing
Intelligent and clever gas and leakage test technology for the highest product quality
Gas and leak testing is a non-destructive quality monitoring of products. For this purpose, we offer intelligent testing technology to meet your and your customers' quality requirements. We advise you on the selection of the right physical testing method and are your reliable partner for the development, implementation and commissioning of turnkey testing systems worldwide.
Contact
Explore more
Electrical testing & characterization
Electrical testing & characterization
With the help of electrical testing, we enable the testing of electrical signals of fuel cells, batteries, sensors, etc. under defined boundary conditions. Thanks to parameterizable test software, we guarantee electrical measurement with the highest accuracy. In addition to standardized testing technology, we also offer customer-specific adaptations. We are also happy to take over the testing of your products.
Contact
Hydraulic testing
Hydraulic testing
In the field of hydraulic testing, we offer test and calibration stands for hydraulic testing and calibration of products and components. In doing so, we master the handling of different media at highest pressures. Our range of products extends from systems for series testing to development and quality assurance during series production to highly functional testing technology for product development.
Contact
Machine vision
Machine vision
Smart optical solutions for your demanding tasks in manufacturing processes
Our Machine Vision experts develop, build, and support machines and systems for optical inspection and process control in close cooperation with our nine locations worldwide. Our scalable, adaptive solutions have a high degree of standardization. They can therefore be used in the laboratory, in small series and single part production as well as in production lines with short cycle times. This allows us to get the most use out of each application with the minimum investment needed. A close and trusting partnership with our customers is a matter of course for us.
Contact
Explore more
Testing equipment by moehwald
Testing technology for fuel cells stack & system
Testing technology for fuel cells stack & system
Hydrogen is an essential component of renewable energies. In mobility as well as energy supply, hydrogen is seen as a fuel of the future. Drive concepts with mobile fuel cells (PEM) or pure hydrogen engines are gaining ground worldwide. But also stationary SOFC fuel cells are gaining more and more popularity in power generation.
These strong transformations, especially in the automotive industry, have also prompted Moehwald to expand its product portfolio in the direction of fuel cell test benches.
Already 2008 Moehwald with the partner MS2 stepped in development and production for test benches of the mobile (PEM) fuel cell. This cooperation was intensified again from 2017 and with it Moehwald has competence-wise a wide base to design fuel cell test benches. This is enlarged by the Bosch Manufactiuring network, which also build up strong competences in the field of hydrogen.
And as one of the few test technology manufacturers worldwide Moehwald has a complete in-house infrastructure for hydrogen and methane.
Get in contact
Explore more
Testing technology for diesel injection systems
Testing technology for diesel injection systems
Reducing pollutants and optimizing consumption are the challenges facing both diesel and gasoline combustion technologies if they are to survive in the future and comply with the required emissions standards. In addition to technical solutions, synthetic fuels can also make modern combustion engines future-proof. No matter in which direction the further development of the technologies will go, test benches from moehwald can help the product and system developer to make these technologies better and more cost-effective and give the engine and automobile manufacturers the opportunity to meet the emission standards of the future under real driving conditions. Many years of experience and continuous development of test procedures in close cooperation with product development form the basis for our test bench concepts.
Get in contact
Explore more
Services
Services
We accompany our customers in every project phase: from concept creation to process optimization of plants.
With our real-time software Prisma RT and the electronics RTE, we offer powerful and highly accurate solutions for your testing tasks.
Further services of our engineering team are software application development, IoT software and application development, development and optimization of measurement and control technology, provision and implementation of software updates, upgrade of existing systems and equipment and training on our products.
Get in contact
Explore more
Some of our application areas
Fuel cell
Fuel cell
Safety and quality are paramount in the development and production of fuel cells. We support you in ensuring these with the following services:
- Electrical test benches for cells, components and stacks up to 100% humidity, up to 100% H2 (incl. safety technology)
- Performance, functional and endurance testing
- Gas and leak testing
- Customer specific adaptations
- Execution of tests as a service
Contact
eDrive
Testing for electrical drives
Universal test systems for testing electric motors, electric axles, gearboxes and powertrains along the entire product life cycle - from development to endurance and end-of-line testing.
Your benefits:
- High flexibility and short delivery times
- Easy to adapt to your needs
- Adaptability to various automation concepts
- Integrated EMC concept (electromagnetic compatibility)
- Optimized energy consumption and natural frequency build-up
- Short cycle time, integrated NVH test, long-term stability,
- Specialized and easy to use software system
Contact
Battery
Battery tests from cells to complete battery
Our battery testing systems for modules and packs are based on over 15 years of experience in battery testing. They can be used for both end-of-line (EOL) and beginning-of-line (BOL) testing. All our systems are modular in design and can be individually combined from individual modules such as voltage measurement, high-voltage testing (HV), charge/discharge, current measurement, resistance measurement (DCIR/ ACIR) or functional tests with CAN communication.
The systems can be supplied both as separate test units and integrated into (partially) automated stations.
Contact