What size is the iPhone 12 Pro Max case?

Size Chart for Newer iPhones (iPhone 12 - 14) Model Length (in.) Screen Size (in.) 12 5.78” 6.06” 12 Mini 5.18” 5.42” 12 Pro 5.78” 6.06” 12 Pro Max 6.33” 6.68” 7 more rows Apr 4, 2024

What do iPhone 12 Pro Max look like?

The iPhone 12 Pro Max display has rounded corners that follow a beautiful curved design, and these corners are within a standard rectangle . When measured as a standard rectangular shape, the screen is 6.68 inches diagonally (actual viewable area is less).

Why is iPhone 12 Pro Max so heavy?

Though the iPhone 12 and 12 Pro are the same size, the 12 Pro is heavier thanks to its extra hardware and the fact that, like the iPhone 12 Pro Max, it's made of stainless steel. The iPhone 12, meanwhile, is made out of aluminum. It's strong in its own right and lighter than steel, but it's not as tough.

How big is the iPhone 12x pro max?

Overview and Dimensions Device dimensions are 78.1×160.8×7.4 millimeters (3.07×6.33×0.29 inches) 1 . The device weighs 228 g. iPhone 12 Pro Max has a Super Retina XDR OLED display with a 6.7-inch screen (109.8 cm 2 , 19.5:9 aspect ratio), and an approximately 87.4% screen-to-body ratio.

What other cases fit an iPhone 12 Pro Max?

iPhone 12 and iPhone 12 Pro dimensions are compatible with each other. You can use their cases simultaneously. iPhone SE (second generation), iPhone 7, and iPhone 8 .

What is so special about the iPhone 12 Pro Max?

While both flagship phones offer Apple's A14 Bionic chip, 5G and OLED displays, the iPhone 12 Pro Max's 6.7-inch screen is a lot larger than the 6.1-inch panel on the iPhone 12 Pro . In addition, the iPhone 12 Pro Max offers a bigger optical zoom than the iPhone 12 Pro (2.5x vs 2x) and larger digital zoom (12x vs 10x).

What is special in the iPhone 12 Pro Max?

The camera bump on the 12 Pro Max is larger than the 12 Pro. It's the main wide camera and the telephoto that are very different on the 12 Pro Max. The wide has the same f/1.6 lens as the 12 and 12 Pro, but it also has a 47-percent larger physical sensor that can capture more light with less noise.

Is the iPhone 12 Pro Max waterproof?

The iPhone 12 Pro Max is water-resistant . It has a rating of “IP68” which means it's fully protected from dust and can handle being underwater for up to 30 minutes at a depth of 6 meters. If your phone gets dropped in a puddle, or a shallow pool, or gets wet from the rain, it will be just fine.

Are iPhone Pro Max 12 and 13 the same case size?

iPhone 12 Pro cases vs iPhone 13 Pro Well, unfortunately, no. The iPhone 12 Pro and iPhone 13 Pro have similar dimensions, but the iPhone 13 Pro comes with several upgrades.

Are iPhone 12 Pro Max and 15 Pro Max the same size?

The iPhone 12 Pro Max and iPhone 15 Pro Max have the same size display at 6.7 inches , but the iPhone 15 Pro Max is lighter and more compact.

Are iPhone 12 Pro Max and 14 the same size case?

The Answer is: No. As you can see, while the iPhone 14 Pro Max may look similar to the iPhone 12 Pro Max, but they are quite different on the inside . This means that even if you already have iPhone 12 Pro Max case, you'll need a new one.

Do iPhone 12 and 12 Pro Max use the same case?

The two phone have the exact same dimensions despite one having much more powerful hardware so you can switch cases between the two. This is where the good news ends however, the iPhone 12 cases are not compatible with the iPhone 12 Mini or 12 Pro Max .

3D Printable iPhone 12 Pro Max Case by Jeffrey J Lumetta (2024)

TribesStoreFronTiersFORUMNEWCanvasThe AdventureNEWPhysical

Published 2021-01-06T17:13:24+00:00

12promax-b-p8-share

6,279 views 792 downloads

1 collection

Community Prints Add your picture

2 comments

'+ '

'+ '' + comment.user.username + '' + (comment.user.is_premium?'':"") + ' • ' + comment.user.name+' • '+ formatDateToHumanReadable(comment['date_posted'])+source+ ''; if (comment.is_print == true && (comment.print_status == 2 || comment.print_status == 1) ) { //Add a Print subtitle after the posting date for this comment if (buildInModal){ returnData += ''; } else { returnData += '' + ' Community Print' + ''; } } let reply = ''; let textLikes = comment.likes == 1 ? ' Like' : ' Likes'; let likeButton = ''+comment.likes+''+ textLikes +''; let filterCommentsButton = 'Show all comments by '+comment.user.username+''; let dislikeButton = ''+comment.likes+''+ textLikes +''; likeButton = comment.is_liked ? dislikeButton : likeButton; reply = '

'+ likeButton + filterCommentsButton + '

'; returnData += '

' + '' + '' + '

'; return returnData + '

'+ '

'+ '' + replied + ''+ '' + Autolinker.link(escapeHTML(comment.comment)) + '' + '

' + attachments + '

' + hiddenPrint + reply + '

'+ '

'; } function filterComments(username){ $([document.documentElement, document.body]).animate({ scrollTop: $("#post-comment-avatar").offset().top - 150 }, 800); $('.comment').css('border-bottom', '0'); $('.comment').hide(); $('.comment[data-user="'+username+'"]').show(); $('.filterLink[data-user="'+username+'"]').replaceWith('Back to all comments'); $('.filterLink.show-all').css('opacity', '1'); } function showAllComments(username){ $('.filterLink[data-user="'+username+'"]').replaceWith('Show all comments by '+username+''); $('.filterLink').css('opacity', '0.6'); $('.comment').show(); } function bindImagePopup() { $('.commentimage').click(function() { const src = $('.commentimage').attr('src').replace('url(', '').replace(')', '').replace('comment-thumbnails', 'comment'); try { $(document).foundation() } catch(err) { window.open(src, '_blank'); } $.fancybox({ 'padding': 0, 'autoScale': true, 'width': 580, 'height': 580, 'href': src }).trigger('click'); }); } function escapeHTML(s, forAttribute) { const ESC_MAP = { '&': '&', '<': '<', '>': '>', '"': '"', "'": ''' }; forAttribute = (typeof forAttribute !== 'undefined') ? forAttribute : true; s = s.replace(forAttribute ? /[&<>'"]/g : /[&<>]/g, function(c) { return ESC_MAP[c]; }); return s.replace(/(?:\r\n|\r|\n)/g, '
'); } Object.size = function(obj) { let size = 0; for(let key in obj) if(obj.hasOwnProperty(key)) size++; return size; };

Loading comments...

' + '' + '' ); } else if(commentList.html() === 'Be the first to comment. ') { commentList.html(''); commentList.css('text-align', 'left'); } $('#comment_list').prepend(buildComment(comment)); $('#attachments_ul').empty(); $('#attachments').empty(); $('#is-print').hide(); $('#prints-options').hide(); $('#formnewcomment').val(''); const commentsCounter = $('.noComments'); commentsCounter.text(parseInt(commentsCounter.first().text()) + 1); } } }).always(function() { $('button').attr('disabled', false); $('#post-comment-loader').hide(); }); }); $('.ajax-upload-dragdrop').on('click', function() { window.customEventDispatcher.dispatchEvent('SHOW_LOGIN'); }); $('#formnewcomment').on('click', function() { window.customEventDispatcher.dispatchEvent('SHOW_LOGIN'); }); }setTimeout(initComments, '500') function appendCommentImage(image) { $('#attachments').append(''); $('#attachments_ul').append( '

' + '

3D Printable iPhone 12 Pro Max Case by Jeffrey J Lumetta (12)

' + '' + '' + '' + '

' ); if($('[id="attachments_ul"] li').length === 1) { $('#is-print').show(); $.ajax({ url: '/prints/create-prints-form/146177' }).done(function(data) { const options = $('#prints-options'); options.empty(); options.append(data); options.show(); }); } } function changeIsPrint(checkbox) { const options = $('#prints-options'); checkbox.checked ? options.show() : options.hide(); } function deleteCommentImage(uid) { $('[id="' + uid + '"]').parent().remove(); $('[id="attachments"] option[value="' + uid + '"]').remove(); if($('[id="attachments_ul"] li').length === 0) { $('#is-print').hide(); $('#prints-options').hide(); } $.ajax({ url: '/api/v2/image?upload_id=XXX'.replace('XXX', uid), method: 'DELETE' }); }

Published 2021-01-06T17:13:24+00:00

Jeffrey J Lumetta

@jeff9845

4 objects

2Followers

Send Message to jeff9845

Please enter the code below

Send Message

See your Inbox

'; } $('#sendMessage').on('click',function(){ $('#result').html("").hide(); var message = $('#messagearea').val(); var captcha = $('#captchaAnswer').val(); if(message == ""){ $('#result').html(showMessage("Whoops! Message can not be empty!",'alert')).show(); return } if(captcha == ""){ $('#result').html(showMessage("Please enter to captcha code!",'alert')).show(); return } // Get some values from elements on the page: var username = 'jeff9845'; var url = "/users/message"; // Send the data using post var csrfToken = $('.csrf_token').val(); var captcha = $('#captchaAnswer').val(); $.ajax({ url: url, type: 'POST', data: { _csrf_token: csrfToken, captcha:captcha, content: message, username: username } }).done(function(data) { $('#messagearea').val(""); $('#captchaAnswer').val(""); $('#messageresult').html(showMessage(data,'success')).show(); $('#secondModal').foundation('reveal','open'); $('#captcharefresh').click(); }).fail(function(data) { $('#result').html(showMessage(data.responseJSON.error_description,'alert')).show(); }); }); }); $('.btn-message').hover(function(){ $('.btn-message i').addClass('color-mmfgreen'); }, function(){ $('.btn-message i').removeClass('color-mmfgreen'); });

25 2 Add to Collection

Description

This is an iPhone 12 Pro Max case. It is thick enough at the bottom to protect the camera. The sides protect the screen as well.

This must be printed with flexible filament. I use TPU.

Printer needs to be calibrated for correct fit.

*** I have not drop tested this case so proceed at your own risk.

Show more Show less

License

MyMiniFactory Exclusive - Credit - Remix - Noncommercial